Prg Vx76 User Manual 3.6 Manuel d'utilisateur télécharger pdf (Page 46)

30 VX76 SOFTWARE USER MANUAL

+ Channel - fixture’s channel number.

+ Address - fixture’s DMX universe/address. The DMX universe and address is expressed with dot notation, for

example, the first address of universe 0 (A) would be 0.1.

+ Lamp Curve - specifies lamp dimmer curve setting (if applicable): Fast Bottom, Fast Top, Full at 1%, Hot Patch,

IES Square Law, Slow Bottom, or Slow Top.

+ Focus - options for swapping and/or reversing pan and tilt.

+ Location - for use with 3D graphic features. Refer to "X, Y, Z Locations" on page 323.

+ Orientation - for use with 3D graphic features. Refer to "3D Orientation" on page 324.

+ DMX Offset - sets DMX offset channels between fixtures.

Note: When entering the universe/address, a decimal point must ALWAYS be used even if only one value is provided.

For example if entering both values, the entry would be [

universe#.address#

]. If entering only the universe, the entry

would be [

universe#

.]. If entering only the address, the entry would be [.

address#

Entering Patch Commands

A patch command has the following format:

+ [Patch] [Chan] channel# [At] universe#.address#

If the channel number or DMX address is not included, the luminaire will be patched at the next channel or address.

For example, to patch a luminaire at channel 10 as the first channel in DMX universe 2, enter the following command:

+ [Patch] [Chan] 10 [At] 2.1 [Enter]

A [Patch] [Enter] immediately after this will patch channel 11 with the same luminaire type at the next available DMX

address in universe 2 (as long as channel 11 does not already exist).

Remember to change the luminaire type if necessary before pressing [Enter].

Luminaires are automatically located in the Plan View. The luminaire icons can be moved in the Plan View display

while patch edit is enabled.

Patching a range of luminaires can be accomplished with the following syntax:

+ [Patch] [Chan] start# [Thru] end# [At] universe#.address#

Patching Multi-Channels - Conventionals and Scrollers

Conventionals and scrollers can be patched to multiple DMX channels:

+ [Patch] [Chan] chan# [At] universe#.address# [Thru] address# + address#

1 2 ... 41 42 43 44 45 46 47 48 49 50 51 ... 417 418

Pas de commentaire

Prg Vx76 User Manual 3.6 Manuel d'utilisateur Page 46