Prg AutoPar User Manual 2.1 Manuel d'utilisateur télécharger pdf (Page 40)

32 AUTOPAR

WASH LUMINAIRE USER MANUAL

Replacing Front Lens

The luminaire includes four different front lens which can be swapped as needed.

Parts:

LENS, VERY NARROW

LENS, NARROW

LENS, 8-ROW LENTICULAR

LENS, 12-ROW LENTICULAR

Tools:

none

WARNING: Remove power from luminaire before performing any maintenance procedures.

To replace Front Lens:

Step 1. Remove power from luminaire.

Step 2. At securing ring, squeeze flanges and remove (Figure 4-3).

Step 3. Remove Front Lens.

Step 4. Align raised areas on back of new Front Lens with notches in Rotation Assembly. (Lens can be installed in

one of two 180° orientations.)

Step 5. Re-install securing ring, ensuring it is fully seated in its groove.

Figure 4-3: Replacing Front Lens

Front Lens

Securing Ring

Squeeze flanges

Lens Rotation Assembly

to loosen

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 46 47 48

Pas de commentaire

Prg AutoPar User Manual 2.1 Manuel d'utilisateur Page 40