Prg V676 User Manual 3.5 Manuel d'utilisateur télécharger pdf (Page 301)

V676

/ V476

CONTROL CONSOLE USER MANUAL 283

Selective Recall

The Selective Recall feature is used to recall specific parameter data from specified channels (

active

inactive

) in a

cue, preset, or beam state.

Guidelines:

+ Selective Recall routes through the filter settings.

+ If Timing is selected at the touchscreen filter, then the parameter

and

all timing information will be recalled (making

that the current state).

+ If Timing is

not

selected at the touchscreen filter, then only the parameter will be recalled.

+ If Manual Timing is enabled (refer to "Manual Timing" on page 220), then the current time information in the

luminaires will be recalled. (For example, if focus has a time of 10 seconds and color has a time of 5 seconds,

then the luminaire will recall the parameters using those individual times.)

Note: The system assumes that data to be recalled is from a cue. As such, use of the <Cue> button is optional.

Recall stored cue data:

Step 1. Using Function Filter, select parameters to be recalled. (Refer to "Function Filter" on page 115.)

Step 2. If timing is desired, press [Man Time]. Recalled parameters will change in the luminaire’s current time

settings.

Step 3. Select channel(s) as required.

Step 4. Press [Recall] <Cue> [m] [Enter]. All stored data will be recalled from the specified cue (m) for the selected

luminaires, as dictated by the selections on the filters.

Recall stored preset data:

Step 1. Using Function Filter, select parameters to be recalled. (Refer to "Function Filter" on page 115.)

Step 2. If timing is desired, press [Man Time]. Recalled parameters will change in the luminaire’s current time

settings.

Step 3. Select channel(s) as required.

Step 4. Press [Recall] [Preset] [x] [Enter]

[Recall] Preset Palette Button. All stored data will be recalled from the

specified preset (x), as defined by the selections on the filters.

Undo a Delete Command

In addition to reversing Store and Update commands, the Undo feature can be used to reverse a Delete command.

Undo (reverse) a Delete command:

+ [Undo] [Store] [Enter] - reverses the last store/update/delete command.

(cue)

Undo Store

1 2 ... 296 297 298 299 300 301 302 303 304 305 306 ... 443 444

Commentaires sur ces manuels

Pas de commentaire

Prg V676 User Manual 3.5 Manuel d'utilisateur Page 301

Commentaires sur ces manuels

Produits connexes et manuels pour Panneau de contrôle Prg V676 User Manual 3.5